8SMC5-USB
2.24
Contents:
1. About
2. Safety instructions
3. Quick start guide
4. Technical specification
5. XILab application User’s guide
6. Programming
7. Control via Ethernet
8. FAQ
8.1. No device found / Can’t open device
8.2. Unable to rotate the motor by the controller
8.3. USB connection loss
8.4. Self-test of the 8Eth1 adapter
8.5. How do I implement an emergency stop button?
8.6. Default 8SMC5 admin panel password list
8.7. How to get a xilab window that has disappeared off the screen?
8.8. Where can I find the programming manual for the 8smc5 controller?
8.9. Python CRC algorithm
8.10. Virtual controller as in XILab Software
8.11.
probe_flag
- what is it?
8.12. How to check if the connection to 8SMC5-USB is established and still active during my session using the libximc library?
8.13. The problem of compensation for backlash (example from technical support)
8.14. Raspberry Pi control
8.15. When using the libximc library and Linux with kernel version less than 3.16, there are possible hanging of the operating system
8SMC5-USB
Docs
»
8. FAQ
»
8.6. Default 8SMC5 admin panel password list
8.6. Default 8SMC5 admin panel password list
¶
Device name
Password
8Eth1 adapter
admin
8SMC5 Ethernet
0000